Listed below are the results that I achieved using Spectrogram  to adjust the SSB filters on K2 #208.   I used the method described by Tom Hammond N0SS which is available on the Builders Resource Page of the Elecraft web site.  Click on any of the thumbnail images below to view the full sized image.  Each image shows the original results (K2 default settings) and the adjusted results (K2 filter settings changed using Spectrogram).  The K2 filter settings that were displayed in Cal Fil are shown above each trace in the images.

	FL1 - LSB	FL2 - LSB	FL3 - LSB	FL4 - LSB
	FL1 - USB	FL2 - USB	FL3 - USB	FL4 - USB

73,
WT9W

 e-mail WT9W